P65 Warning Label

Front and Rear Coil Overs GM A Body



SKU: TC493-1 Category:


The brackets in the kit are representation. The actual brackets sent may be different depending on what rear axle you have ect.

Front AND rear  coil over kit

Your choice of front spring rates

Your choice of Warrior or Crusader valving

These are double adjustable

A225-350  Warrior valving

A324AP-350 Crusader valving

Front Spring Rate Options:
250lb- 11” tall springs for drag race only. Serious lightening required.
350lb- Small block cruise or drag race with lightening required.
450lb- Small block cruise, big block drag race.
550lb- Small block handling, all big blocks except drag. NOTE: 550 rate requires alternate products to achieve a low front ride height. Please call for details

Rear Spring Rate Options:

110   Lightened a lot, no rear seat, 5 gal cell, light weight battery, glass bumper ect.

120 5 gal fuel cell glass bumpers

150 Most cars fall in this range

175 street cruiser full interior all stock weight items

250  “music in the trunk”

If your unsure please message us, call or email.

Spanner Wrench & Thrust Bearing Kit: Spanner wrench tool is used to adjust vehicle height while shock stays mounted. This wrench is needed to make height adjustments. The thrust bearing kit is designed to be placed between the spring and the spring seat attached to the shock. This makes for easier adjustments since the spring seat is rotating on a bearing. This kit is recommended for easier adjustments but is not needed to complete the installation. We do not recommend adjusting without a thrust bearing kit

Bearing Mount: Viking offers two mounting options for the lower shock attachment points. Mild street applications can use polyurethane for ride comfort and reduced harshness. Corner carving, drag racing, auto-x and road race should choose bearing ends for increased reliability and performance. By their very nature, performance parts both in poly and bearing, tend to feel and sound different than rubber mounted factory parts.


Viking’s front and rear coilover kit combines a high quality hybrid spring with a 19-position double adjustable shock. The upper coil fits the upper spring perch on your vehicle while the lower part of the coil matches the coil over shock bottom. A coil spring compressor is not required, as the adjuster acts as the compressor. The optional thrust bearing and spanner wrenches allow for easy adjustment of ride height from factory to 1-1/2″ lowering. The shock itself has independent compression and rebound adjusters to allow custom tuning for street, strip, auto-x and road race – all in one shock. Rear kit comes with relocation brackets. please select the rear axle that you have in the car


Additional information

Weight 30 lbs
Dimensions 15 × 5 × 5 in


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.